酚醛树脂对人工林杉木木材的浸注性及其改善的研究

研究了低分子量酚醛树脂对杉木木材的浸注性及树脂在木材内的分布状态，并对苯醇抽提前处理法、常压浸渍和真空浸注的效果进行了评价。无论抽提处理与否，常压浸渍的树脂水溶液充填率为理论最大浸注量的10％左右，而真空浸注可达到90％以上，真空浸注效果明显；无论是常压浸渍还是真空浸注，抽提处理后树脂的浸注性有很大改善，但常压浸渍的效果不是非常明显。软X射线解析样品纵向树脂分布状态结果表明：无论是否经过抽提处理，在常压浸渍的情况下，树脂主要分布在样品的端部，而经过真空浸注处理，树脂注入的深度增加，尤其经过抽提处理后树脂可达到样品中心。由此可见，抽提处理和真空浸注并用，使树脂的分布状态有很大改善。另外，抽提处理后样品之间树脂分布的差异也趋于减小，即树脂在样品间的分布状态也有改善。用实体显微镜观察树脂在木材细胞腔内的充填状况结果表明：沿着样品纵向从端部到中心树脂充填率呈下降趋势，而且抽提处理的充填率比未抽提处理的高。     

热泵木材干燥机的发展与应用

阐述了应用热泵木材干燥机干燥木材的工作原理及其优越性，介绍了几种热泵木材干燥机的流程及其应用，并对各种热泵木材干燥机流程的特性进行了分析和探讨。     

湿地松等20个树种种子射线造影技术研究

应用软Ｘ射线仪对湿地松等２０个树种种子进行衬比造影和直接造影技术研究，找出了各树种种子不同焦片片距（３００ｍｍ和２００ｍｍ）不同感光材料（Ｘ光胶片、普通胶片、相纸）的最适电压、电流和曝光时间，以及最适衬比剂、衬比浓度和衬比时间．     

Fibril angle variability in earlywood of Norway spruce using soft rot cavities and polarization confocal microscopy

The main purpose of this study was to investigate the variability of the fibril angle of tracheids in earlywood of Norway spruce (Picea abies L. Karst.). Polarization confocal microscopy was chosen and compared with the method utilizing the orientation of soft rot cavities. There was a significant correlation between the soft rot and polarization confocal microscopy methods, which showed the same trend of high fibril angles in the first part of the earlywood followed by a decrease toward the end of earlywood. This declining trend was less pronounced in annual rings containing compression wood. Moreover, large variations in fibril angle occurred between neighboring tracheids. The investigation also emphasized the differences between X-ray diffraction and microscopic methods, as the large variation seen by the latter methods is not seen by the X-ray diffraction approach because of its large area of measurement. No correlation was found between fiber morphology (i.e., average length, width, density) and the average fibril angle in the investigated annual rings.     

Soft X-ray observation of water distribution in the stem ofCryptomeria japonica D. Don II: Types found in wet-area distribution patterns in transverse sections of the stem

Using soft X-ray photography, two-dimensional observations were made of the water distribution within the green stem ofCryptomeria japonica D. Don. Variations in the distribution pattern of the wet area in the horizontal plane of the lower stem were described. The distribution patterns showed extreme variation among individual trees, with broad wet-area distribution types appearing, namely, the regularly distributed wet area and the irregularly distributed wet area. We defined five basic types of wet-area distribution patterns on the basis of their regularity or irregularity. It was concluded that the between-tree variation in the wet-area distribution causes the between-tree variation in the mean moisture content of the heartwood. The distribution patterns of the wet area were similar for individual trees within each plus-tree clone.Part of this paper was presented at 46th annual meeting of the Japan Wood Research Society at Kumamoto, April 1996     

Wood Moisture Content Measurement by X-Ray Exposure Method

lNTRoDUCTIONTheon-sitcnon-dcstructit'cmcasurcl11cntofu.oodmoisbocontcntattTactsgrcatintcrcsts.Itpla3'simpor-tantpartsinthescicntificrcscarchsucl1asonthchcatandmasstransportproccssesint"ooddri'ing.thcim-pregnationofliquidinxt'ood.thcmoisturccontcntdistri-b…     

人机工程学在林业机械设计中的应用

论述了人机工程学对林业机械产品设计的重要性,指出了在机具和林业设备设计中的人机工程学原则.     

纵向刨切生产薄木中刀具与产品质量的关系

本文探讨了纵向刨切机生产薄木过程中刀具的材料、形状及刀具与压尺的相对位置等因素对产品质量的影响。     

杨树微纤丝角的变异及其与木材性质的相关关系

微纤丝角为细胞次生壁S2层微纤丝排列方向与细胞主轴所形成的夹角,与木材的物理性质、力学性质和化学性质都有着直接的关系。应用x射线衍射法测定了7个杨树无性系(14株样木)胸径处各年轮的微纤丝角,并对应分析和测定了各年轮的木材基本密度、纤维长度、纤维宽度和纤维素含量。研究结果表明,杨树微纤丝角在年轮间存在显著差异,其径向变异规律为从髓心向外以微纤丝角逐渐降低,年轮间的平均微纤丝角在7.8旱?8褐洌荒静幕久芏取⑾宋ざ取⑾宋矶群拖宋睾吭谀曷旨湟泊嬖谙灾钜臁O喙胤治霰砻鳎⑾怂拷怯肽静幕久芏取⑾宋ざ取⑾宋矶群拖宋睾看嬖谙灾母合喙毓叵??0.01),相关系数分别为-0.450、-0.586、-0.516和-0.660。回归分析结果表明,多项式方程可较好地描述杨树微纤丝角与所测定的木材性质的关系,相关系数均在-0.45以上(n=125)。本文的研究结果认为,在今后针对杨树材性改良的育种计划中,微纤丝角是一个重要的选育和改良指标。图3表3参34。     

浅谈开放式数控系统及其在线切割机床上的应用

介绍了开放式体系结构数控系统的概念、特点及分类,并简要介绍了开放式数控系统在电火花线切割机上的应用。